Table of Contents
Advertisement
Aging
Overview
• Record several programs onto the mounted HDD with DR mode until the recording capacity becomes full.
Then play back all the recorded programs (including special playback).
• When the remaining capacity becomes almost zero due to multiple recordings, the disc is formatted, recording is made onto the
same disc again and playback starts.
• Direct recording to DVD-RAM media is not possible. So firstly record 1 program with 1-hour length onto HDD with DR mode, and
then record onto DVD-RAM with FR mode.
• By performing reencode copying, almost entire DVD-RAM capacity is consumed to copy and record.
Restrictions and Notes:
1. Confirm that ATP can receive CH009 and CH090.
2. Insert a recordable DVD-RAM media into the DVD drive.
3. Set the initial setting of HDD/DVD drive to HDD.
4. Turn the power ON to play the DVD recorder and press STOP to receive broadcasting.
Flow chart for Aging Sequence
26
Advertisement
Chapters
Table of Contents
