b. Pull the clip as shown to remove the card reader with the card-reader retaining bracket out of the
flex module.
Figure 34. Removing the card reader in the flex module
c. Flex the four clips on the sides of the card-reader retaining bracket to remove the card reader
from the bracket.
Figure 35. Removing the card reader from the card-reader retaining bracket
5. To install a new card reader into the card-reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Then, press the new card reader downward until
it snaps into position.
Figure 36. Installing the card reader into the card-reader retaining bracket
76
ThinkStation P510 and P710 User Guide