4. If you are replacing a storage drive, flex the sides of the bracket to remove the storage drive from
the bracket.
Figure 56. Removing the storage drive from the type
5. Flex the sides of the bracket and align pins
storage drive. Do not touch the circuit board
Note: Ensure that the circuit board
the bracket.
Figure 57. Installing the storage drive into the type
88
ThinkStation P510 and P710 User Guide
2
bracket
1
on the bracket with the corresponding holes in the new
3
on the storage drive.
3
faces upward and the connectors
2
bracket
2
face toward the rear of