FLEXCUT™ 80
9. Torch Connection:
Connect handheld or machine torch.
10. Work Connection:
Connect cable with work clamp.
11. Remote Connection (14-pin amphenol):
Allows access to Arc Start trigger, Arc Initiated contact and raw
Arc Voltage.
Items 12 thru 15 on the back of the
FLEXCUT™ 80 (See Figure B.3)
12. Fan: Provides machine cooling. When the machine is
switched ON, the fan runs continuously.
13. Power Switch:
Turns the input power to the machine ON/OFF.
14. Input Cord (10 ft.):
Connects the unit to input power.
15. Air or Gas Inlet (1/4" NPT Quick Connect):
Compressed air or gas connection.
FIGURE B.3
13
14
15
12
B-3
OPERATION