Nikon Coolpix B500 Reference Manual page 35

Wireless Networks
Option
Pairing after camera setup
Unpairing
Uploading pictures via Wi-Fi
Number of pairable smart
devices
C
Re-pairing
Re-pair when pairing again after unpairing.
Select Connect to smart device in the camera network menu, and then follow the
instructions on the camera and smart device screen. When Non-NFC enabled devices:
press OK. is displayed, press the k button, and then launch the SnapBridge app on the
smart device. Tap z in y Connect, and then tap the product name of the camera you
want to pair with on the screen that is displayed. When the authentication code is displayed
on the camera screen, follow the instructions in "Setup from a Smartphone or Tablet" from
Step 4 (A15).
Other Options for the SnapBridge App
Option
Remote photography
Viewing the pictures on the
camera (download selected
pictures)
See SnapBridge app online help for more information.
Getting Started
Camera Setup
Select Connect to smart device in the camera network
menu, and follow the instructions in "Setup from a
Smartphone or Tablet" from Step 2 (A14).
In the SnapBridge app, tap z in y Connect, and then
tap End pairing on the screen that is displayed.
A Wi-Fi connection is recommended for large-volume
uploads.
Follow the on-screen instructions in the SnapBridge app
to switch to a Wi-Fi connection.
The Wi-Fi > Network settings item in the camera
network menu contains Auth./encryp. and
Password options. The default option for Auth./
encryp. is WPA2-PSK-AES.
The camera can be paired with up to five smart devices.
However, it can connect to only one device at a time.
Use the smart device to release the camera shutter.
Before performing remote photography, turn the camera
on.
Use the smart device to view and download the pictures
on the camera. This option is available even when the
camera is off.
19
Description
Description