Table of Contents
Advertisement
Installing the Cisco ASR 920 Series Router
SUMMARY STEPS
1. Orient the fan tray so that the captive screws are aligned to the chassis cavity on the back panel. See the
following figure.
2. Push the fan assembly into the chassis until the power connector seats in the backplane and the captive
installation screws make contact with the chassis.
3. Tighten the captive installation screws, using a flat-blade or number 2 Phillips-head screwdriver.
DETAILED STEPS
Step 1
Orient the fan tray so that the captive screws are aligned to the chassis cavity on the back panel. See the following figure.
Figure 22: Installing the Fan Tray in the Chassis
Step 2
Push the fan assembly into the chassis until the power connector seats in the backplane and the captive installation screws
make contact with the chassis.
Step 3
Tighten the captive installation screws, using a flat-blade or number 2 Phillips-head screwdriver.
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
Installing the Fan Tray
61
Hide quick links:
Advertisement
Table of Contents
