Nfc Module - HP EliteBook 820 G4 Maintenance And Service Manual

NFC module

Description
NFC (Near Field Communication) module (includes NFC cable and NFC antenna)
NFC cable (included in the Cable Kit)
Before removing the NFC module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the touchpad (see
Remove the NFC module:
1. Disconnect the cable from the top of the NFC module (1).
2. Lift the module from the computer (2).
NOTE:
Reverse the removal procedures to install the NFC module.
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
Touchpad board on page
The NFC antenna is spared with the touchpad.
30).
35).
59).
Spare part number
821666-001
912091-001 (Cable Kit)