Cisco RV315W Quick Start Manual page 4

WAN1 If the WAN1/LAN0 port on the back panel is set to a
secondary WAN interface (WAN1):
LAN0 If the WAN1/LAN0 port on the back panel is set to an
additional LAN interface (LAN0):
LAN1-8 The numbered lights correspond to the LAN ports on the
back panel of the RV315W.
USB
3G
4
• Solid green when the RV315W is connected to the
Internet through the WAN1 port, but there is no traffic
over this port.
• Flashes green when the RV315W is sending or
receiving data over the WAN1 port.
• Off when the WAN1 port has no connection.
• Solid green when the RV315W is connected to a device
through the LAN0 port, but there is no traffic over this
port.
• Flashes green when the RV315W is sending or
receiving data over the LAN0 port.
• Off when the LAN0 port has no connection.
• Solid green when the RV315W is connected to a device
through the corresponding port (LAN1 to 8), but there is
no traffic over that port.
• Flashes green when the RV315W is sending or
receiving data over the corresponding LAN port.
• Off when the corresponding LAN port has no
connection.
• Solid green when a USB device is detected, but has no
read and write operations.
• Flashes green when a USB device is detected and has
read and write operations.
• Off when the RV315W does not detect a USB device.
• Solid green when the RV315W is connected to a 3G
wireless network, but there is no traffic over the 3G USB
port.
• Flashes green when the RV315W is sending or
receiving data over the 3G USB port.
• Off when the RV315W does not connect to a 3G
wireless network.
Cisco RV315W Broadband Wireless VPN Router Quick Start Guide