Wolf OG30 Installation Manual page 16

IN S TA L L AT I O N
Side Burner Installation
LP G AS CO NN E C T I O N
Connect 2-stage LP gas regulator to flare tee at location
1
shown. Connect flare swivel connector to one end of
flare tee. Refer to the illustration below.
Connect regulator assembly to flexible gas line coming
2
into grill cart from side burner as shown in the illustration
below.
Connect regulator assembly assembly to grill manifold at
3
flare swivel connector as shown in the illustration below.
Reinstall rear panel and door of grill cart. Reposition grill
4
drip tray. Place burner cap on burner head, place grate
on burner pan and affix knob to bezel with bezel nylon
liner.
LP GAS
REGULATOR FLARE
SWIVEL
FLARE
TEE
LP gas regulator assembly.
|
16 Wolf Customer Care 800.222.7820
GRILL
MANIFOLD
FLEXIBLE
GAS LINE
LP gas connection.
N ATU R AL GAS C O N N EC TIO N
Split high pressure natural gas line into two lines, one to
1
attach to grill natural gas regulator and one to attach to
side burner via flexible line and
flexible gas line through cart access hole.
Place flexible gas line through cart access hole and
2
attach to side burner regulator at pipe elbow. Elbow may
be rotated to face downward for larger adapters. Do not
rotate elbow upward. Refer to the illustration below.
Natural gas connection.
1 / " NPT adapter. Place
2