Advertisement
SURFACE
COOKING
The sealed surface burners are secured to the cooktopand
CAUTION: To prevent damage to the cooktop or pan,
are NOT designedto be removedbythe consumer,
never operate surface burner withouta pan in place,
Since the burners are sealed into the cooktop, boilovers
neverallowa panto boildryand neveroperatea surface
won'tseep underneathto the burnerboxarea. Thus, there
burneron HIGH for extendedperiodsof time.
are no hiddenspillsin the burnerbox area to clean.
TO
light surface burner:
1. Place a pan on the burnergrate.
Super High Speed Burners
2. Push in and turnknobto the LITE position.
Some modelsfeature two special SUPER HIGH SPEED
sealed burners.Use the SUPER HIGH SPEED burnersto
quicklybring water toa boil and for large - pot cooking. See
,,,_ _ _I LZT_-_,..
information on rating plate to determineif your appliance
featurestheseburners.
The two High Speed burnersare locatedat the right-front
and left-rear burners.
3. After the burner lights, turn the knob to the desired flame
HIGHSPEED
size. The ignitors will continue to spark until the knob is
BURNER
turned from the LITE position.
CAUTION: If the flame should go out during a cooking
operation, turn the burner off. If gas has accumulated
and a strong gas odor is detected, wait 5 minutesfor the
gas odor to disappear before relighting burner.
To light surface burner during a power failure:
1. Be sureall controlsare in the OFF position,
2. Holda lighted matchto the desired surface burner head.
3. Push in and turn knob to the LITE position. The burner will
then light.
4. Adjust the flame to the desired flame size.
CAUTION: When lighting the surface burner, be sure all
of the controls are in the OFF position. Strike the match
first and hold it in position before turning the knob to the
LITE position.
Advertisement
