Technics ST-C700D Operating Instruction page 22

Listening to music stored on a
Bluetooth
®
1
Press [NWP].
2
Press [N INPUT O] below [NWP] repeatedly
to select "Bluetooth".
≥ "Ready" is indicated on the display.
≥ If you press [1/;], this unit will try and connect to the
last connected Bluetooth
Linking" is indicated on the display.
– "
3
Select "ST-C700D" from the Bluetooth
device's menu.
≥ The name of the connected device is indicated on the
display.
4
Start playback on the Bluetooth
Operations on the remote control
Stop Press [∫].
Press [1/;].
Pause
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
During play or pause, press and hold
Search
[6] or [5].
≥ On the unit: press and hold [:] or [9].
≥ This unit can only be connected to one device at a time.
≥ To use this unit's remote control with a Bluetooth
Bluetooth ® device must support AVRCP (Audio Video Remote
Control Profile).
Depending on the status of the device, some controls may not
work.
≥ When enjoying video contents with this function, the video and
audio output may not be synchronised.
22
(22)
device
device.
®
device.
®
® device, the
Bluetooth
You can change the transmission mode to prioritise
transmission quality or sound quality.
1
Press [NWP].
2
Press [N INPUT O] below [NWP] repeatedly
to select "Bluetooth".
≥ If a Bluetooth
it.
3
Press [MENU].
®
4
Press [3, 4] repeatedly to select
"Link Mode" and then press [OK].
5
Press [3, 4] to select the mode and then
press [OK].
Mode 1
Mode 2
≥ Select "Mode 1" if the sound is interrupted.
Disconnecting a Bluetooth
device
1
Press [NWP].
2
Press [MENU].
3
Press [3, 4] repeatedly to select
"Disconnect?" and then press [OK].
4
Press [3, 4] to select "Yes" and then press
[OK].
≥ The Bluetooth
source is selected.
transmission mode
®
device is already connected, disconnect
®
Emphasis on connectivity
Emphasis on sound quality (default)
® device will be disconnected if a different audio
®