Table of Contents
Advertisement
CU900
PRE-ASSEMBLY
UNPACKING
1. Cut the straps, then along the dotted line on the bottom of the box; lift the box over
the unit and unpack.
2. Locate the hardware package. The hardware is separated into four steps. Remove
the tools first. Remove the hardware for each step as needed to avoid confusion.
The numbers in the instructions that are in parenthesis (#) are the item number from
the assembly drawing for reference.
www.spiritfitness.com
TOOLS INCLUDED:
‰ 13/15mm Wrench
‰ Phillips Screwdriver
‰ 5mm Allen Wrench
‰ 6mm Allen Wrench
PARTS INCLUDED:
‰ 1 Main Frame
‰ 1 Rear Stabilizer
‰ 1 Seat
‰ 2 Seat Bracket Covers
‰ 1 Console
‰ 1 Console Mast
‰ 1 Front Handle Bar
‰ 1 Handle Bar Cover
‰ 2 Console Mast Covers
‰ 2 Pedals
‰ 1 Cup Holder
‰ 1 Hardware Kit
5
Advertisement
Table of Contents
