Sony STR-DA6400ES Service Manual page 163

QQ
3 7 63 1515 0
Pin No. Pin Name
AC13,
VDI_D27, VDI_D31
AC14
AC15 LAN_TXD1
AC16 GCLOCK00
AC17
AC18 BOOT_MODE07
AC19
AC20 XIO_ACK
AC21 WAKEUP
AC22
AC23 XIO_SEL3
AC24 LAN_CRS
AC25 LAN_MDC
AC26 LAN_MDIO
AD1 to MM_DATA30, MM_
AD3 DATA31, MM_DATA16
AD4
VDI_D04 to VDI_D06,
AD5 to
VDI_D12, VDI_D18,
AD11
VDI_D21, VDI_D26
AD11
AD12
AD13 LAN_TX_EN
AD14 LAN_TXD2
AD15 LAN_RX_ER
AD16, LAN_RXD2,
AD17 LAN_RXD3
TE
L 13942296513
AD18
AD19 AO_OSCLK
AD20
AD21
AD22
AD23 BOOT_MODE06
AD24
AD25
AD26 XIO_SEL2
AE1
AE2 to VDI_D32, VDI_D02,
AE5 VDI_D00, VDI_D09
AE6
AE7 to VDI_D15, VDI_D11,
AF10 VDI_D20, VDI_D24
AE11
AE12
AE13 LAN_TX_ER
AE14 LAN_TXD0
AE15 LAN_RX_DV
AE16 LAN_RXD0
AE17
AE18
AE19
AE20
www
AE21, GCLOCK01,
AE22 GCLOCK02
AE23
.
AE24
AE25
AE26
http://www.xiaoyu163.com
I/O
- Not used
O Digital audio signal output to the ethernet interface
- Not used
AI_SD2 - Not used
I Interrupt request signal input from the parallel/serial converter
XIO_D10 I/O Two-way data bus with terminal
I Acknowledge signal input from the fl ash rom
- Not used
XIO_D08 I/O Two-way data bus with terminal
O Chip select signal output to the parallel bus/I2C bus converter
I Carrier data signal input from the ethernet interface
O Clock management data signal output to the ethernet interface
I/O Two-way management data bus with the ethernet interface
I/O Two-way data bus with the SD-RAM
VSS - Ground terminal
- Not used
VDI_D26 - Not used
VCCP - Power supply terminal (+3.3V)
O Enable signal output to the ethernet interface
O Digital audio signal output to the ethernet interface
I Error signal input from the ethernet interface
I Digital video and audio signal output to the ethernet interface
VCCP - Power supply terminal (+3.3V)
O Serial data transfer clock signal output to the D/A converter (for network section)
AI_SCK O Serial data clock signal output to the A/D converter (for network section)
AI_WS O Sampling clock signal output to the A/D converter (for network section)
AI_SD3 - Not used
O AC off detection signal output terminal
VCCP - Power supply terminal (+3.3V)
XIO_D13 I/O Two-way data bus with terminal
O Chip select signal output to the parallel/serial converter
VDI_V2 - Not used
- Not used
VCCP - Power supply terminal (+3.3V)
- Not used
VSS - Ground terminal
VDI_D30 - Not used
O Error signal output to the ethernet interface
O Digital audio signal output to the ethernet interface
I Serial data signal input from the ethernet interface
I Digital video and audio signal output to the ethernet interface
VSS - Ground terminal
AO_SCK O Serial data clock signal output to the D/A converter (for network section)
AO_SD1 - Not used
AO_WS O Sampling clock signal output to the D/A converter (for network section)
- Not used
x ao
y
AI_SD0 I Digital audio signal input from the A/D converter (for network section)
i
GPIO7 - Not used
VSS - Ground terminal
XIO_D09 I/O Two-way data bus with terminal
http://www.xiaoyu163.com
8
Not used
Not used
Q Q
3 6 7 1 3
Not used
u163
.
Not used
STR-DA6400ES
2 9 9 4 2 8
Description
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9
163