Sony STR-DA6400ES Service Manual page 13

QQ
3 7 63 1515 0
Remote commander
You can use the supplied remote to operate the receiver
and to control the Sony audio/video components
that the remote is assigned to operate.
Main remote commander
(RM-AAL012)
The RM-AAL012 remote is used for illustration
purpose.
TE
L 13942296513
Name Function
AV / (on/ Press to turn on or off the audio/video
standby) components that the remote is assigned to
operate.
If you press /
time, it will turn off the receiver and other
Sony components (SYSTEM STANDBY).
Note
The function of the AV / switch changes
automatically each time you press the input
button (
/ (on/ Press to turn the receiver on or off.
standby)
If zone 2 or zone 3 is selected, only the
main receiver is turned on or off with this
button. To turn off all components including
an in zone 2 or zone 3, press /
( ) at the same time
(SYSTEM STANDBY).
Saving the power in standby
mode.
When "Control for HDMI" and "RS-232C
Control" are set to "OFF."
ZONE Press to switch the zone 2 or zone 3
operation.
AMP Press to enable the receiver operation.
www Input Press one of the buttons to select the
buttons component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned to
control Sony components. You can program
the remote to control non-Sonycomponents
.
following the steps in following the steps in
"Programming the remote".
http://www.xiaoyu163.com
Name
TV INPUT
WIDE
D.TUNING
CLEAR
ENT/MEM
MOVIE
MUSIC
GUI MODE
HDMI
OUTPUT
QUICK
CLICK
OPTIONS
TOOLS
MENU
HOME
a)
a)
CATEGORY
MODE
TUNING +/– Press to select station.
PRESET
b)
+
TV CH +
F1/F2
( ) button at the same
PARTY
).
SLEEP
and AV /
RM SET UP Press to set up the remote.
THEATER
TV
SHIFT
Numeric
buttons
x ao
y
i
http://www.xiaoyu163.com
8
Function
Press TV ( ), then press TV INPUT to
select the input signal of a TV.
Press TV ( ), then press WIDE
repeatedly to select the wide picture mode.
Press SHIFT ( ), then press to enter
direct tuning mode
Press SHIFT ( ), then press to
– clear a mistake when you press the
incorrect numeric button.
– return to continuous playback, etc. of
the satellite tuner or DVD player.
Press SHIFT ( ), then press ENT/MEM
to enter the value after selecting a channel,
disc, or track using the numeric buttons, or
to store a station during tuner operation.
Press to select sound field for movies.
Press to select sound field for music.
Press to switch the display mode of the
menu between GUI MODE (to display the
menu on the TV screen) and DISPLAY
MODE (to display the menu in the display
window).
Press to select an HDMI jack you want to
output HDMI video signals.
Press to display the on-screen remote on
the TV the screen.
Press / / / to select the menu items.
Then press to enter the selection.
Press to display and select items from
option menus for receiver, DVD player,
TV, or Blu-ray Disc Player, etc.
Press to display the menu used to operate
audio/video components or a TV.
Q Q
3 6 7 1 3
a)
/ Press to operate the DVD player, Blu-ray
Disc Player, CD player, MD deck, tape
deck, or component connected to the
a) b)
DIGITAL MEDIA PORT adapter etc.
a)
/
Press to select the category mode for
satellite tuner.
Press to register FM/AM/satellite tuner
/– stations or to select preset stations.
b)
/– Press TV ( ), then press TV CH + /– to
operate the TV, satellite tuner, VCR, etc.
Press BD or DVD ( ), then press F1 or
F2 to select a component to operate.
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
Press to display confirmation screen to
start party mode.
Press AMP ( ), then press SLEEP to
activate the sleep timer function and the
duration which the receiver turns off
automatically.
Press to turn the Theater mode on and off
when connecting the receiver to products
featuring "BRAVIA" Sync.
Press to enable the TV operation.
Press to light up the button. It changes the
remote button function to activate the
buttons with pink printing.
Press SHIFT ( ), then press to
– preset/tune to preset stations.
– select track numbers of the
CD player, DVD player, Blu-ray Disc
Player or MD deck.
u163
Press -/-- ( ) to select track number 10.
– select channel numbers of the VCR or
satellite tuner.
.
– After pressing TV ( ), press the
numeric buttons to select the TV channels.
STR-DA6400ES
2 9 9 4 2 8
Name Function
-/-- Press to
– select track numbers over 10 of the CD
player, DVD player, Blu-ray Disc
Player, or MD deck.
– select channel numbers over 10 of the
TV, Satellite tuner or the VCR.
A.F.D. Press to select sound field.
2CH/ Press to select sound field or to switch the
A.DIRECT audio of the selected input to analog
without any adjustment.
RESOLUTION Press RESOLUTION repeatedly to
change the resolution of signals output
from the HDMI OUT or COMPONENT
VIDEO MONITOR OUT jack.
PIP Press PIP to switch the image of the PIP
(Picture in Picture) window. The image
of the PIP window is the one from the
EXT VIDEO IN jack. You can swap the
position of the main screen and the PIP
window by pressing
Note
When the HDMI input is selected on the
main screen, you cannot swap the position
of the main screen and the PIP window.
DISPLAY Press to display the current status of or
information on components connected
to the receiver.
Note
In the GUI MODE, press the button to
display the menu on the TV screen.
RETURN/
Press to return to the previous menu or
EXIT exit the menu while the menu or on-screen
guide of the VCR, DVD player, or
satellite tuner is displayed on the TV
screen.
CATEGORY Press to select the category for satellite
+/– tuner.
1 5 0 5 8 2 9 9 4
·/· Press to select an album.
DISC SKIP
Press to skip a disc when using a multi-
disc changer.
MASTER
Press to adjust the volume level of all
VOL +/– speakers at the same time.
TV VOL +/– Press TV (
adjust the volume level of the TV.
MUTING
Press to turn off the sound temporarily.
Press the button again to restore the sound.
BD/DVD/ Press to display the menus of the DVD
TOP MENU, the DVD player on the TV screen. Then
MENU
use / / / and
operations.
MACRO1, Press AMP (
MACRO2 MACRO 2 to set up the macro function.
a)
See the table for information on the buttons that you can use
to control each component.
b)
The tactile dot is attached to these buttons (TV/5,
PRESET +/TV CH +). Use as a mark of operation.
Notes
• Some functions explained in this section may not work
depending on the model.
• The above explanation is intended to serve as an example
only. Therefore, depending on the component, the above
operation may not be possible or may operate differently
than described.
m
co
9 9
( ).
2 8 9 9
), then press TV VOL +/– to
to perform a menu
), then press MACRO 1 or
,
13