Mazda mx-5 2017 Owner's Manual page 305

NOTE
Some Bluetooth
®

certain amount of time before the
symbol is displayed.
If the pairing failed, "Err" flashes for

three seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle is
moving, "PAIR DISABLE" is displayed.
If seven Bluetooth

already been paired to the vehicle,
pairing cannot be performed and
"MEMORY FULL" is displayed. Delete
one paired device to pair another one.
Pairing a Bluetooth
does not have a four-digit PIN code
1. Using the audio control dial, select
the pairing mode "PAIR DEVICE"
in the "BT SETUP" mode. (Refer to
"Bluetooth audio set up" for details.)
®
2. Press the audio control dial to
determine the mode. After "ENTER
PIN" is displayed on the audio display
for three seconds, "PIN 0000" is
displayed and the PIN code can be
input.
3. Press the audio control dial while "PIN
0000" is displayed. "PAIRING" flashes
on the audio display.
4. Operate the Bluetooth
and set it to the pairing mode while
"PAIRING" is flashing.
5. As the Bluetooth
requires a PIN code, input "0000".
6. When the pairing is completed,
"PAIR SUCCESS" are displayed after
about 10-30 seconds, after which
"PAIR SUCCESS" continues to be
displayed for three seconds, and then
the unit returns to the normal display.
audio devices need a
audio devices have
®
audio device which
®
audio device
®
audio device
®
and
NOTE
If pairing cannot be completed, try

"1234" instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
Some Bluetooth
®

certain amount of time before the
symbol is displayed.
If the pairing failed, "Err" flashes for

three seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle is
moving, "PAIR DISABLE" is displayed.
If seven Bluetooth

already been paired to the vehicle,
pairing cannot be performed and
"MEMORY FULL" is displayed. Delete
one paired device to pair another one.
Device selection
If several devices have been paired, the
Bluetooth unit links the device last
®
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode "LINK CHANGE"
in the "BT SETUP" mode. (Refer to
"Bluetooth audio device set-up" for
®
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
Bluetooth audio device is displayed.
®
If no Bluetooth
®
currently linked, the name of the first
device among the paired devices is
displayed.
Interior Features
Bluetooth
audio devices need a
audio devices have
®
audio device is
5–83
®