Low Engine Coolant Temperature Indicator Light; Wrench Indicator Light - Mazda mx-5 2017 Owner's Manual

When Driving
Instrument Cluster and Display
Signal
*
(Green)
*
*
Light
Cruise Main Indication/Indicator Light
(White/Amber)
Cruise Set Indication/Indicator Light
(Green)
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
Authorized Mazda Dealer.
Wrench Indication/Indicator
Light
*
Type A instrument cluster
Perform maintenance in accordance with
the message.
Type B instrument cluster
When the ignition is switched ON, the
wrench indicator light is illuminated and
then turns off after a few seconds.
The wrench indicator light is illuminated
when the preset maintenance period
arrives. Verify the content and perform
maintenance.
Refer to Maintenance Monitor on page
6-20.
4–30
*Some models.
Indicator Lights
High Beam Control System (HBC) Indicator Light
Blind Spot Monitoring (BSM) OFF Indicator Light
Lane Departure Warning System (LDWS) OFF Indicator
*1
*1
Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
If the low engine coolant temperature
indicator light remains illuminated after
the engine has been sufficiently warmed
up, the temperature sensor could have
a malfunction. Consult an Authorized
Mazda Dealer.
Page
4-78
4-90
4-82
4-101
4-101