P429 Specifications - Arcam P429 Handbook

P429
specifications
Continuous power output (20Hz–20kHz at 0.2% THD), per channel
ST (stereo) and DM (dual mono) modes
Four channels driven, 4Ω / 8Ω, 20Hz–20kHz
One channel driven, 4Ω / 8Ω, 1kHz
BR (bridged) mode
Two channels driven, 8Ω, 20Hz–20kHz
One channel driven, 8Ω, 1kHz
Harmonic distortion, 80% power, 8Ω at 1kHz
Inputs
ST (stereo) and DM (dual mono) modes
Input sensitivity for 100W / 8Ω
Signal/noise ratio (Awtd) ref 100W / 8Ω
BR (bridged) mode
Input sensitivity for 300W / 8Ω
Signal/noise ratio (Awtd) ref 100W / 8Ω
Input impedance
Frequency response
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
125W / 90W
180W / 110W
270W
320W
0.002%
0.8V variable down to 7V
112dB
0.6V variable down to 5V
110dB
10kΩ
20Hz–20kHz ± 0.05dB
110–120V~ or 220–240V~, 50-60Hz
1kW
433 x 425 x 105mm
13.5kg
15.5kg
Mains lead
E-14
Continual improvement policy
Arcam has a policy of continual improvement
for its products. This means that designs and
specifications are subject to change without
notice.