Table of Contents
Advertisement
3
In the Bluetooth
[1. -- Bluetooth Headset --] in this order and select a headset to pair
with from a list of Bluetooth
4
Select [1. Paired Head Set] > [2. Connect] > [2. Enable] in the pair-
ing screen in this order and press the OK key.
Pairing between the Bluetooth
(BTC) is completed.
After pairing, be sure to configure the cradle connection with the Bluetooth
Caution
headset in Step 4 to enable it. If connected setting is not done, the Bluetooth
headset that does the pairing cannot be used.
Before pairing your Bluetooth
cancel the connection (or standby mode) with the Bluetooth
connect the headset to the BTC and use it.
Do not connect the Bluetooth
Bluetooth
nating calls.
To unpair a paired Bluetooth
Select [1. Delete] in the Bluetooth
screen. Press the OK key to unpair the paired Bluetooth
®
screen, select [1. Pairing Mode] > [1. Pairing] >
It takes approximately one
minute for locating.
®
devices. Doing so may disable operations for originating and termi-
®
®
headset
®
devices located.
®
headset and the Bluetooth
headset in use with the Bluetooth
®
headset being used in pair with the BTC to other
®
Headset screen in Step 4 above to switch to a Delete
®
Connecting a Headset
cradle (BTC),
®
device in use. Then
®
headset.
®
cradle
®
®
1 - 37
Advertisement
Table of Contents
