Charging - NEC IP3NA-BCH User Manual

Pbx cordless terminal
Hide thumbs Also See for IP3NA-BCH:
Table of Contents

Advertisement

Charging

Before you use the Bluetooth
left out of service for a long time, charge it for at least 5 hours. (Full charging takes about 16
hours to complete.) A fully charged handset will allow you to talk for about 8 hours continu-
ously and stand by for about 30 hours if low-power mode is enabled or for about 15 hours if
low-power mode is disabled.
The remaining battery voltage icon appearing in the LCD screen, coupled by the incoming
call/charging lamp and an alarm tone, alerts you to the remaining battery voltage of the Blue-
tooth
handset. The table below describes how these indications appear depending on the
®
remaining battery voltage of the handset.
Remaining
battery
Icon
voltage
High
Medium
Low
Charging
required
Charging in
progress
Charging
error
handset for the first time or reuse the handset after it has been
®
State indications
Incoming call/charging
lamp
Blinking red
-
Fully charged : Lit green
Charging
-
Blinking orange
Alarm
Tone
-
-
-
#
: Lit red
About Cordless Terminals
Remarks
"
"
"
The handset can be
used as long as the
beep sounds.
"
"
1 - 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip3na-12txh(bt)

Table of Contents