Table of Contents
Advertisement
Transforming the Standard Handset into a IP3NA-BCH ADAPTER( )
17
Stow the extra length of the bottom unit connecting cable at the
bottom unit connector and close the bottom unit.
Bottom unit connecting cable
18
Cut the coupled device of the tilt legs for handset option with nip-
pers or the like.
The coupled device is supplied with the handset cradle.
19
Insert the stopper coupled device into the right and left stoppers of
the tilt legs for handset option to couple them.
20
Insert the coupled device for tilt legs firmly into the right and left
tilt legs of the tilt legs for handset option.
21
The tilt legs in original position.
1 - 34
Stopper coupled
device
Tilt legs for handset option
Knob
R
Bluetooth
cladle BTC
Cover
Coupled device for tilt legs
Advertisement
Table of Contents
