Setting The Clock - AEG ZOP38903XD User Manual

16 www.aeg.com
7.11 Submenu for: Timers
A
Duration
Start
09:03
E
Menu item
Set Minute Minder
Set Duration
Set Start Time
Set End Time
Elapsed Time

7.12 Setting the clock

functions
When you use the core
temperature sensor, the
functions Duration and End
do not operate.
You can change the time and date when
you touch the clock on the display, when
the appliance is active.
1. Go to menu: Heating Functions.
2. Set the heating function and the
temperature.
3. Touch
B C
4 32
3 31
2h 30min
1 29
11:33
0 28
or go to the menu: Timers.
A. Return to menu
B. Current set duration time
C. Reset duration time
D. End time
E. Start time
End
D
Description
To set and start a countdown, the timer will be
shown on the main screen and an alarm will sound
when the timer has finished counting down. This
timer will not interrupt the cooking and is also
available when the oven is switched off. Scroll to
set, the timer will start automatically.
To set and start a countdown, the timer will be
shown on the main screen and the oven will stop
and an alarm will sound when the timer has finish-
ed counting down.
To set the switch-on time for the current settings.
To set the switch-off time for the current settings.
Show, hide or reset the timer that counts up when
pressing the start button. The elapsed time is only
available while the oven is active.
4. Choose a clock function.
5. Scroll the list to set the necessary
time. Wait a few seconds for the time
to set itself automatically or touch to
confirm: h or min. You can delete the
settings if you touch: x.
When the clock function ends, an
acoustic signal sounds and a message
comes on the display. You can stop or
extend the cooking process.
7.13 Submenu for: Options
Further individual settings related to
safety, convenience and oven lamp.