Table of Contents
Advertisement
This owner's manual explains the basic instructions of this unit. Some DVDs are produced with
limited operation during playback. For example, many DVDs do not allow users to skip government
warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the
instruction notes of discs.
" " may appear on the screen during operation. A " " means that the desired operation is not
permitted by the unit or disc.
PLAYING A DISC
1. Press the STD. BY/ON button to turn on the unit.
2. Press the FUNCTION button repeatedly to select DVD mode or directly press the DVD button on the
remote, then press the ENTER button.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 3.
3. Press the
button to open the disc door.
4. Hold the disc by its edges and gently push it onto the spindle with label side facing towards you until
you hear a "click".
5. Press the
button to close the disc door.
After loading, for most DVDs, the unit will automatically start playing or take you to the main menu.
If the unit does not automatically start playing the DVD, press the
PLAYING A PICTURE FILE DISC
This unit can play JPEG files recorded on a CD-R or CD-ROM disc.
1. Press the
button to open the disc door.
2. Hold a JPEG file disc by its edge and gently push it onto the spindle with label side facing towards you
until you hear a "click".
3. Press the
button to close the disc door.
4. The unit will load the disc and automatically display the contents of the disc on the screen, while also
beginning to play the picture file. These files will then be played back one by one.
5. Press the
STOP button to go to the folder list.
6. Use the
,
,
or
the selected file.
NOTES
• You can press the
slide show.
• You can press the
view the previous picture. Press the
• You can press the ANGLE button to rotate direction of the picture by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the
PAUSE button. To resume normal playback, press the
the
PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the
STOP button at the location where you want to interrupt playback. To resume playback at
the position where the disc was stopped, press the
SKIPPING TO A DIFFERENT TRACK
• Press the
PREV button to skip to the start of the current/previous track.
• Press the
NEXT button to skip to the next track.
• For an Audio CD, use the number buttons on the remote control to go directly to the desired track
number.
FPE2608DV_ib_eng_17-30.pmd
PLAYING A DISC
button to view and select desired file, then press the ENTER button to confirm
PAUSE button to freeze the picture, and press the
PREV or
NEXT button to change the picture. Press the
NEXT button to view to the next picture.
E - 23
23
PLAY button.
PLAY button to resume
PLAY button. Each time you press
PLAY button.
1/15/2008, 12:43 PM
PREV button to
Advertisement
Table of Contents
