Switching on
The cruise control is switched on manually,
it requires a vehicle speed of between 18 and
112 mph (30 and 180 km/h).
An automatic gearbox must be in position D
or M.
F With the ignition on, turn the thumbwheel 1
to the "CRUISE" position: cruise control
mode is selected, but not started (grey).
F Vehicle moving, press one of the buttons 2
or 3: the current speed of your vehicle
becomes the cruise speed setting.
The cruise control is activated (green).
By default, the inter-vehicle distance is set at
"Normal" (2 dashes).
Otherwise, the last setting made will be used
when switching on the system.
Switching off the ignition cancels any
programmed speed setting.
When the cruise control is operating,
Stop & Start is automatically
deactivated.
Pause
The dynamic cruise control can be paused
manually by:
-
action by the driver:
● on button 4,
● on the brake pedal,
● on the electric parking brake control,
● when changing from D to N with an
automatic gearbox.
-
or automatically, if operation of the ESC
system is triggered for reasons of safety.
Following braking of the vehicle
bringing it to a complete stop, the
system holds the vehicle stationary ;
the cruise control is paused. The driver
should press the accelerator pedal to
move off, then reactivate the system
by exceeding 18 mph (30 km/h) and
pressing button 2, 3 or 4.
If the driver takes no action following
this immobilisation, the electric parking
brake is applied automatically after a
few minutes.
Driving
4
169