Maytag DWU9921AAE Use & Care Manual page 5

Upper Rack
The upper rack of your dishwasher is designed
with flexibility in mind. Glasses, cups, small
plates, boMs, pans, etc. can be loaded in many
different positions to suit your needs.
The rack is designed so dishes can be centered
behind a single tine and held in place by the
rack's support wires. Dishes can also be loaded at
an angle to maximize space.
The upper rack may be removed if desired.
Push inward on the front of the rack rail ends to
unsnap. Remove rail ends and pull out rack.
To replace rack: reinsert rack, place rail ends in
position and snap fronts into place by pushing
outward.
The hinged shelf can be used to stack two levels Lower Rack
of cups, juice glasses, and other short items. Large dinner plates and other dishes may be
Load small diameter items under shelf so placed in any convenient location in the lower
water will reach upper tier. When the shelf is rack but soiled surfaces should face the
folded up, this area can be used for taller glasses, center.
stemware, etc. Tall items such as bakeware and large platters
should be loaded on the lef} side of this rack.
When loading glassware, leave a small space Thin items (cookie sheets, pizza pans, etc.) may
between each piece so they do not touch each
be placed behind the folding shelf. With the
other during the wash cycle. Do not place shelf down, two levels of glasses and cups can be
glasses over the tines, loaded.
PAG E 4