Maytag DWU9921AAE Use & Care Manual page 10

Options
Cancel Heated Dry by pressing the pad again.
No heat will be provided, but the fan will still
Temp Boost Sensor operate. The dry option can be changed anytime
tile dishwasher is on and the door is latched
If for any reason the incoming water exeept when selecting the Quick or Rinse 6:
temperature is below 120°F, press the Temp Hold cycles.
Boost Sensor pad to assure the water is heated
to proper temperature for best cleaning and Cancelling the Heated Dry option on the Quick
drying results. A small indicator light will glow Cycle will eliminate the dry poltion entirely in
when it is selected. The main wash will be order to shorten the cycle. The load will need to
extended and Heating Delay will appear in the be towel dried.
display. NOTE: Your dishwasher features an option
Press the Temp Boost Sensor pad again to recall which memorizes the option
cancel the option, selected with a cycle. If Temp Boost
Sensor, Stud Rinse or Heated Dry is
Sani Rinse selected with a particular cycle, it will be
Press the Sani Rinse pad to turn the heating recalled automatically the next time that
element on during the prewash (select cycles) cycle is selected.
and all rinses. A small indicator light will glow Drain/Off
when it is selected. The Sani Rinse option helps
maintain water temperature and improve drying When the Drain/Off pad is pressed, 2 MIN. will
results. This option is not available for the Rinse appear in the display and the dishwasher will
& Hold cycle, drain for approximately 2 minutes.
Press the pad again to cancel the option. To cancel a cycle without draining, press the
Drain/Offpad twice. This will immediately turn
Heated Dry
the dishwasher off.
Seleet this option to provide heat during the fan
dry cycle. A small indicator light will glow when
it is selected.
PAGE