Bissell 1941 Series User Manual page 13

Above Floor Cleaning: Wand
1
To have more
reach, press down
on Wand Release
Latch and pull out
the handle.
Above Floor Cleaning: Hose
1
Grab Hose
Connector,
twist counter
clockwise and
pull hose out.
3
Push hose back in,
aligning tabs; twist
clockwise to lock
into place. Be sure
the hose relief is on
bottom.
2
Attach
desired
tool to end
of wand.
2
Attach desired tool
to end of hose
NOTE: The Pet TurboEraser® Tool and
LED Lighted Crevice Tool each fit any
of the above floor cleaning modes;
Handle, Wand, or Hose!
NOTE: Be sure to always remember
to turn the green knob back to "Floor
Suction" mode after using tools.
www.BISSELL.com
11