Bissell 1941 Series User Manual page 11

Operations: Attach Hard Floor Tool
1
Install the clip-on hard floor tool for
optimal cleaning on hard floors.
Operations: Brush Roll Safety Light
1
If red light
illuminates
around height
adjustment
knob, you
have tripped
your brush roll
motor safety
feature.
It may have
3
tripped because
of use on premium
soft carpet. Turn
Height Adjustment
Knob to the "high
carpet" setting.
Also check if
debris is clogged
in brush roll. Clear
debris if necessary.
NOTE: Turn off the brush roll when vacuuming hard or delicate surfaces that may
be caught by the rotating brush. This could include hard wood, tiled floors, small
area rugs or frieze carpets that have long delicate fibers or threads.
2
To remove the tool, place two fingers
in the recess on the foot and lift up on
the clip-on hard floor tool.
2
Power
On/O
Switch
Put vacuum in upright position and turn it off.
4
Power
On/O
Switch
Turn vacuum back on and try again.
Recessed Area
www.BISSELL.com
9