Lennox EL296DFV Installation Instructions Manual page 14

12 -Install the side vent sealing plates and gaskets on the
exterior of the cabinet as shown in figure 21. Secure
with six mounting screws (four reused and two pro­
vided from bag assembly). Holes are pre-punched in
the parts and cabinet, no drilling is required.
13 -Install sheet metal screws (provided) to seal extra two
holes in cabinet not used with side vent clamps.
IMPORTANT
Side vent sealing plates and side vent sealing gas­
kets must be used when converting to right side
venting. Failure to use gaskets and plates may lead
to improper operation of unit.
Top Vent Configuration
FIGURE 19
Exhaust/Air
Intake Connections
Pipe Clamp
Hose Clamp
Page 14
Patch Plate Top Cap
Sheet Metal
Patch Plate
FIGURE 20