From Soft Top In Intermediate Horizontal Position; From Soft Top In Spoiler Position To Soft Top Completely Open; Closing The Soft Top; From Soft Top Completely Open - Fiat 500C ABARTH Supplement Manual

Hide thumbs Also See for 500C ABARTH:
Table of Contents

Advertisement

From soft top in intermediate
horizontal position
From the horizontal intermediate position
press the "one-touch" button A-fig. 3 to
move the soft top automatically to the hor-
izontal completely open position (spoiler
position).
From soft top in spoiler position
to soft top completely open
From the spoiler position press the "one-
touch" button A-fig. 3 to bring the soft
top automatically to completely open po-
sition (vertical opening).
If one of the two buttons is pressed before
reaching the final position, the soft top will
stop and movement will be reversed to the
initial position (spoiler position).
IMPORTANT The vertical opening will be
inhibited if the tailgate is open.
IMPORTANT If the soft top locks during
its movement, it may lose the position; in
this case, you should carry out a complete
opening/closing cycle.
4

Closing the soft top

From soft top completely open

Press the "one-touch" button B-fig. 3
once to automatically close the soft top to
spoiler position (vertical closing). If one of
the two buttons is pressed before reach-
ing the spoiler position, the soft top will
stop and movement will be reversed to the
initial position (completely open position).
From spoiler position to soft top
completely closed
Press the button "one-touch" button
B-fig. 3 in spoiler position to bring the soft
top automatically to safety position (ap-
proximately 25 cm from completely closed
position). If one of the two buttons is
pressed before reaching the stop position,
the soft top may stop in an intermediate
horizontal opening position.
NOTE The soft top will not automatically
close completely. Keep button B-fig. 3
pressed to close the soft top completely.
The soft top will stop immediately if the
button is released between reaching the
completely closed position.
From intermediate position to soft
top completely closed
Press the "one-touch" button B-fig. 3 in
horizontal intermediate position to bring
the soft top automatically to safety posi-
tion (approximately 25 cm from horizon-
tal completely closed position).
Keep the button B-fig. 3 pressed to close
the soft top completely.
The soft top will stop immediately if the
button is released between reaching the
completely closed position.

Advertisement

Table of Contents
loading

Table of Contents