Samson 5824 Mounting And Operating Instructions page 3


Assembly, start-up and operation of this device may only be performed by
trained and experienced personnel familiar with the product.
According to these mounting and operating instructions, trained personnel
refers to individuals who are able to judge the work they are assigned to and
recognize possible hazards due to their specialized training, their knowledge
and experience as well as their knowledge of the applicable standards.

Any hazards which could be caused in the connected valve by the process
medium, operating pressure or moving parts are to be prevented by means
of the appropriate measures.

Proper transportation and storage are assumed.

The actuators have been designed for use in electrical power installations.
For wiring and maintenance, you are required to observe the relevant safety
regulations.

The actuator must be protected against unintentional reconnection of the
power supply.

Note: The device with a CE marking fulfils the requirements of the Directives
94/9/EC and 89/336/EEC.
The declaration of conformity can be viewed and downloaded on the Internet
at http://www.samson.de.
Safety instructions
3
EB 5824-1 EN