Permanent Warnings - Furuno FCR-2119-BB Operation Manual

10. C-MAP CHARTS
10.7

Permanent Warnings

Permanent warnings help you keep the C-MAP up-to-date and these are shown at the
bottom of the screen. Permanent warnings appear if the system detects a condition
that may cause a chart to be not up-to-date.
Message
C-MAP: Database not up to date
C-MAP: Dynamic license reporting over-
due
C-MAP: Dynamic licensing credit limit
C-MAP: No connection to eToken
C-MAP: permits have expired
No connection to dongle.
Permit expired (SSE 25): XXXXXXXX
(Chart name replaces Xs.)
10-4
Meaning, Remedy
Database is not up to date. Update the data base.
The time for the "Next Report Date" has passed. This
occurs once every 12 hours if the condition continues.
Get into the Chart maintenance mode then click the
[License] button. Click the [C-MAP] tab then the [Order
Update File] button.
You have exceeded the allotted credit limit. Raise
credit limit.
eToken dongle is not connected (inside the Processor
Unit) or the eToken has not been initialized. If the don-
gle is connected, open the [License] dialog box, click
the [C-MAP] tab, then click the [C-MAP Setup] and
[OK] buttons to initialize the eToken.
You have an expired permit for a chart. Remove the
chart or renew subscription for the permit.
Dongle not connected. Connect dongle.
You have an expired permit for a chart. Remove the
chart or renew subscription for the permit.