Desktop Cradle; Serial Port - Honeywell MX7 TECTON User Manual

Operating Temperature
Storage Temperature
Humidity

Desktop Cradle

Weight
Dimensions
Temperature
Operating
Charging
Storage
Humidity
IEC 60529
Ports

Serial Port

The connector is industry-standard RS232 and is a PC/AT standard 9-pin D male connector.
Note: Tethered scanners must be connected to powered cradles.
Pin Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI or Power
Note: Pin 9 of this port is connected to +5 VDC and only approved Honeywell cables are to be used for communication
between the cradle and external devices.
32 F to 100° F / -0° C to 40° C
The AC Power Adapter is only intended for use in a 25°C (77°F) maximum ambient
temperature environment.
-40° F to 180° F / -40° C to 80° C
Operates in a relative humidity of 5 – 95% (non-condensing)
18 oz / 500 grams
H 3.5 in x W 4.25 in x L 7.5 in
32° F to 104° F / 0° C to 40° C (charger On, no charging in progress)
50° F to 104° F / 10° C to 40° C (spare battery charger is charging)
-4° F to 158° F / -20° C to 70° C
5% to 90% (non-condensing) at 104° F / 40° C
Compliant to IP40
Power, MX7 Tecton Input/Output and serial port
Description
Data Carrier Detect
Received Data – Input
Transmitted Data – Output
Data Terminal Ready
Signal/Power Ground
Data Set Ready
Request to Send
Clear To Send
+5 VDC sourced by the Cradle
15 - 3