Peripherals
Start > Settings > Control Panel > Peripherals
This panel is used to enable and disable the touch screen heater and scan window heater.
Setting
Touch screen heater
Scan window heater
Heater trip point
Heaters
Note: Settings have no effect if the touch screen / scan window heaters are not enabled / installed.
Tap a radio button to enable or disable the heaters.
The default heater trip point is 0° C / 32° F. Choose a different trip point from the drop down list and tap OK. The
change is in effect immediately without requiring a Warmboot action.
Default
Enabled
Enabled
0º C
Earlier versions may be 40ºC
5 - 51