TRENDnet TEW-814DAP User Manual page 14

TRENDnet User's Guide
PBC (Software/Virtual Push Button)
Wireless > Wi-Fi Protected Setup
In addition to the hardware push button located physically on your access point, the
access point management page also has push button which is a software or virtual push
button you can click to activate WPS on your access point.
1. Log into your access point management page (see
management page" on page 8).
2. Click on Wireless, and click on Wi-Fi Protected Setup.
3. To add a wireless device to your network, click the Add Wireless Device with WPS
button in the Add Wireless Station section.
4. Select PBC option and click Connect.
5. Then push the WPS button on the wireless device (consult wireless device's User's
Guide for length of time) you are connecting.
5. Wait for your access point to finsh the WPS process.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your access point
PIN (Personal Identification Number)
Wireless > Wi-Fi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your access point management page (see
management page" on page 8).
2. Click on Wireless, and click on Wi-Fi Protected Setup.
3. To add a wireless device to your network, enter the 8-digit numeric PIN number of
the wireless client device and click Add Enrollee.
4. Select PIN option and click Connect.
5. Then press the PIN activation on your wireless device (consult wireless device's User's
Guide for length of time) you are connecting.
6. Wait for your access point to finsh the WPS process.
TEW-814DAP
"Access your access point
13