Seiko 8B92 Instructions Manual page 31

Troubles
The watch temporarily
gains or loses time.
The watch displays an
incorrect time hour unit, even
though it displays the precise
time of minutes and seconds
Misalignment
of the time
The reception results are
and hand
successful, but the precise
positions
time is not displayed.
The second hand position
is not correctly aligned
in "the reception results
display" or "the reception
level display."
60
8B92_E_42-66.indd 60-61
Possible causes
The watch fails to receive a radio signal correctly as
a result of external influence (incorrect reception).
The watch has been left in an extremely high or
low temperature place for a long time.
The watch may be set to a time in a different
time zone from the region where the watch is
currently used.
The hand positions were misaligned as a result
of external influence.
→PRELIMINARY POSITION
The second hand is out of the preliminary
position
as a result of external influence.
→PRELIMINARY POSITION
Solutions
① Place the watch where it is able to receive a radio signal more easily.
② Conduct manual reception if necessary.
① When the watch returns to a normal temperature, it will display the precise time as
before.
② If the watch still gains or loses the time, conduct manual reception if necessary.
Check the time zone that the watch is currently set for, and select the correct time zone.
① No crown or button operation is needed, since the automatic hand position adjustment
function will be activated to align the hand positions. Automatic Hand Position
Adjustment Function activates once a minute for the second hand and at 12:00 both for
the AM and PM for the minute and hour hands.
② If the watch still gains or loses time, refer to "IMPROPER FUNCTION" to perform
procedures.
61
2016/04/27 15:55