How To Manually Set The Date - Seiko 8B92 Instructions Manual

Press Button A or Button B
2
to set the time.
One minute Press Button A or Button B once
Advance and then release it.
When either of Button A or Button B
is kept pressed for two seconds or
Continuous
longer, the hand will start to move.
Advance
Press Button A or Button B again to
stop.
B
A
Clockwise
B
A
Counterclockwise
* The hand will not move by turning the
crown.
44
8B92_E_42-66.indd 44-45
Push the crown back in
3
according to the time signal.
Operation has been completed.
The watch resumes its normal movement.
0 1 2

HOW TO MANUALLY SET THE DATE

When the date is not automatically
1
changed in which the watch is unable
to receive a radio signal, the date can
be adjusted manually.
• The date can be adjusted
independently regardless of the time.
• When the watch receives a radio
s i g n a l a f te r c o n d u c t i n g m a nu a l
adjustment of the time, it displays the
time based on the information of time
received.
• W hen usin g the w atc h a g ain in
regions in which the watch is able
to receive the radio signals, it is
recommended to perform "Manual
Reception."
→ HOW TO CONDUCT MANUAL RECEPTION
* When the date is not correct even
if the watch successfully receives a
radio signal, the preliminary position of
the date may be misaligned.
* The watch operates while it enters the mode.
→ PRELIMINARY POSITION
When pulling the crown to the first
click, the second hand stops at the
30-second position.
The watch enters the manual date setting
mode.
(If the stopwatch is moving, the stopwatch hands
also stop at the 0-second position.)
30-second position 0 1 2
(The second hand remains stopped.)
2016/04/27 15:55
45