Marantz SA-10 Owner's Manual page 33

n Cannot playback Discs
Symptom
Cannot playback when the play button is
pressed, or cannot correctly play back a
specific part of the disc.
Cannot playback DVD-R/-RW/+R/+RW
or CD-R/CD-RW.
" No Disc" is displayed.
"Unsupported" is displayed.
n PC or Mac files cannot be played back
Symptom
This unit is not recognized on the
computer.
This unit is not selected as the playback
device.
"Unlock" is displayed.
"Unsupported" is displayed.
n Audio from digital devices cannot be played back (Coaxial/Optical)
Symptom
"Unlock" is displayed.
"Unsupported" is displayed.
The disc is dirty or scratched. Either clean the disc, or insert a different disc.
0
Discs cannot be played back unless they have been finalized. Use a finalized disc.
0
This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
0
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
0
" No Disc" is displayed if the disc is loaded upside-down or if no disc is loaded.
0
"Unsupported" is displayed if a disc that cannot be played is loaded.
0
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a
0
different USB port.
Restart your computer.
0
Check the OS of your computer.
0
When your computer is running on Windows, a dedicated driver software should be installed.
0
Select this unit as the playback device in the sound settings on the computer.
0
When digital audio signals cannot be detected properly, "Unlock" is displayed.
0
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the settings on your computer or
0
player software.
If the computer you use is "Mac OS", please check if the "SA-10S1" format is set below "384000.0 Hz" using the "Audio MIDI Setup".
0
When digital audio signals cannot be detected properly, "Unlock" is displayed.
0
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format
0
from your digital device.
Cause / Solution
Cause / Solution
Cause / Solution
ENGLISH
Page
38
34
－
34
37
37
Page
10
－
20
20
20
23
23
23
Page
24
24
32