Skoda citigo Owner's Manual page 29

The driving data is displayed on the multifunction display.
The multifunction display only operates if the ignition is switched on. After the
ignition is switched on, the function that was last selected before switching
off the ignition is displayed.
WARNING
Concentrate fully at all times on your driving! As the driver you are fully
■
responsible for the operation of your vehicle.
Even at temperatures of around +4 °C, black ice may still be on the road
■
surface! You should therefore not only rely on the outside temperature dis-
play for accurate information as to whether there is ice on the road.
Note
In certain national versions the displays appear in the Imperial system of
measures.
Operation

Read and observe on page 27 first.
Some features of the multi-function display can be operated with the buttons
on the control lever » Fig. 21.
Operation description
But-
ton Action
» Fig. 21
Briefly push up or down
A
Press briefly
B
Fig. 21
Buttons on the control lever
Operation
Select data / set data values
View information / confirm specification
Memory

Read and observe on page 27 first.
The multifunction display is equipped with two automatic memories, 1 and 2.
The display of the selected memory is displayed at the position indicated by
the arrow » Fig. 22.
Single-trip memory

Total trip memory

Select memory
›
Select the corresponding element of the multifunction display
Confirm the element again to switch between the individual memories.
Reset memory
›
Select the corresponding element of the multifunction display
›
Select the desired memory.
›
Press the button » Fig. 21 on page 27 longer.
B
The following values of the selected memory are set to zero.
›
Average fuel consumption.
›
Distance driven.
›
Average speed.
›
Driving time
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the
ignition is switched on until it is switched off.
New data will also flow into the calculation of the current driving information if
the trip is continued within 2 hours after switching off the ignition.
Fig. 22
Multi-function display - Display
example of the memory
» page 28.
» page 28.
Instruments and control lights

27