Skoda citigo Owner's Manual page 138

›
Unlock the bulb holder using the locking latches
the holder from the tail lamp.
Installing
›
Insert the bulb holder in the tail lamp assembly.
All locking mechanisms must audibly snap into place.
›
Carefully place the tail light assembly in the opening in the body and hold
firmly.
›
Unscrew the plastic nut » Fig. 131
5
›
Insert the connector on the lamp holder and press the locking mechanism
2
towards the tail light.
›
Fold back the cover .
1
›
Install the luggage compartment cover and close the tailgate.
Fold the rear seat backrest back.
Replacing the bulbs in the tail lamp assembly
›
Turn the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove » Fig. 132
›
Insert a new bulb into the holder and turn in a clockwise direction to the the
stop.
CAUTION
Ensure that the vehicle paintwork and the tail lamp are not damaged when re-
moving and installing the tail lamp.
136
Do-it-yourself
» Fig. 132 -  and remove
and tighten.
- .