Advertisement
Bobbin winding
Raise pins 5. Disengage the sewing
mechanism. Place a bobbin on magnetic
disc A and a spool of thread on one of the
spool pins. Pass the thread around thread
retainer stud 2, wind it around the bobbin
a few times, as indicated by the arrow.
Push ever 8 against the bobbin to start
the bobbin winder and hold the thread
end at the beginning.
The bobbin winder stops when the bobbin
is full. If you want to stop the bobbin wind
er earlier, pull lever 8 forwards, Remove
the bobbin and cut the thread. Re-engage
the sewing mechanism.
Inserting the bobbin
Insert the filled bobbin into the bobbin
case so that the thread unreels toward the
back (A>. Then draw the thread into slot B
and under the spring into eye C.
Advertisement
