Advertisement
Special sewing feet
Zipper (and edge stitching) foot
Attach the foot offset to the right or left.
Set the needle position accordingly. Guide
the workpiece so that the edge of the zip
per foot moves along the zipper chain on
the right or
left,
respectively.
Top illustration: Foot in left-edge position.
needle in left position Left edge of foot
moves along zipper chain.
Bottom illustration: Foot in right-edge
position, needle in right position. Right
edge of foot moves along zipper chain.
The needle hole in the middle of the foot
is used for inserting zippers concealed so
as to resemble a seam. For this purpose,
attach the foot in the central position an
set the needle in its central position. The
zipper chain moves along the grooves in
the sole of the sewing foot.
Top illustration: When the blindstitch
foot is used guide the folded edge of th
material along edge guide A. The needle
position is regulated by turning the needi
position knob accordingly.
Bottom illustration: Push the darning fo
over the retaining fork of the sewing fool
holder and push it up at the front so thai
stud B enters slots C.
Advertisement
