Deactivating Identification At The Other Telephone - Siemens optiPoint 500 entry Operating Instructions Manual

Using a different telephone in the same way as your own
Step by Step
Speaker
Call forwarding
F:= F=::
or
GA
or
or
Ente r th e code !
34 34 34 34
Dialling after (successful) identification:
You hear dial tone.
Press the key. The lamp goes out.
ýE
or Enter a number immediately.
Call forwarding - follow me after successful identi-
fication
Press the key. The lamp lights up .
If the "store" and "call forwarding" keys are not config-
ured on your telephone:
C
Lift the handset.
UK code or Stand ard code/Euro code.
I
Replace the handset.
Deactivating identification at the other
telephone
G>=
UK code or Stand ard code/Euro code
Enter the code which has b een programmed for you.
Dep end ing on the configuration of the system,
identification is deactivated automatically if the
far-end telephone is not used for several minutes.