Specifications - Zte WARP 7 User Manual

Solution 5: Is a disabled access point set? To reset to initial settings:

From home, tap Apps
Menu > Reset to default.
Problem: Battery level goes down quickly.
Solution: Are you where signal is weak or have been out of service area for a long period? Calling
where signal is weak or being out of service area uses a lot of battery.
Problem: Cannot install applications.
Solution: Applications cannot be installed with only a little free space on the phone or SD card. To
check free space, see
Problem: Cannot unlock screen.
Solution: Power the phone on again. If you are unable to turn the phone off, remove and replace the
battery, and then power the phone on again. Data that was being edited is erased after the phone is
powered on again.

Specifications

The following tables list your phone's and battery's specifications.
Phone Specifications
Item
Weight
Continuous Talk Time
Continuous Standby Time
Charging Time
Dimensions
Maximum Output
For Assistance
> Settings
Storage Settings. Applications not supported by your phone cannot be installed.
Description
Handset alone: Approx. 117 g
Battery installed: Approx. 175 g
3G: Approx. 26.6 hours
3G: Approx. 574 hours
4G: Approx. 544 hours
Approx. 184 minutes
Approx. 154.3 x 76 x 9.3 mm
3G: 0.262 W
4G: 0.248 W
> Mobile networks > Access Point Names >
283