Tethering - Zte WARP 7 User Manual

3. Tap the slider to turn Hotspot on.
 Hotspot is enabled.

To disable Hotspot, tap the slider again.
Note: The best way to keep using the phone as a hotspot is to have it connected to a power supply.
Important: Write down the passkey (password) for this communication (shown onscreen).
Connect to Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your phone hotspot from the network list.

The default name for your phone hotspot is N9519_XXXXXX. You can change the name by
tapping Configure > Network name from the Hotspot screen.
3. Select this phone and follow your onscreen instructions to enter the passkey (provided in the
Hotspot configuration window).
 The device is connected via your phone's Hotspot.
4. Launch your Web browser to confirm you have an Internet connection.

Tethering

Use Tethering to share your device's Internet connection with a computer that connects to your device via
USB cable, or by Bluetooth.
Note: When the phone is USB tethered, you cannot transfer files between your phone and your computer.
1. From home, tap Apps
Connectivity
> Settings .
219