Table of Contents
Advertisement
Setting of patterns of consumption
8
You can set your Zone Regulator to match your needs. Think
of place, time and heat:
Place: Your rooms can be grouped into as many as six heat
zones, e.g. all bedrooms, studies, lounges, etc. All rooms in
a heat zone go by the same time programme.
Time: Each heat zone has its own time programme to
control when there is heat in the rooms. Since your heat
requirement changes during the week, you can divide the
time programme into three different programmes (A, B, C)
that cover different days, e.g. weekdays and weekends.
Heat: Each time programme can be divided into two heating
periods, e.g. heat from 06.00 to 09.00 and again from 15.00
to 22.00.
NB: At the works, all room thermostats are registered under
heat zone M and with the heating periods shown here in
Time Programme A.
See example of pattern of consumption on pages 14-15.
Time programme A
Time programme B
Time programme C
Regulator boxes M, S1 and S2
Tilmeldte rumtermostater
(typisk én pr. rum)
Heating periods:
Time and duration
(e.g. 6-9 and 15-22)
M T O T F L S
Weekdays:
1=M, 2=T,
3=0, etc.
Advertisement
Table of Contents
