Advertisement
Using your microwave oven
MICROWWE OVEN CONTROLS
When You first plug in the oven, the Display
will show "88:88"if
the Control Panel ON/OFF
switch is ON (see page
5). If the Display
ever
agaln
shows all 8's, it means Your electricitv
was off for a while or that the Control
Panel
ON/ OFF Switch was turned
OFF and then
back ON. To clear the 8's from the Display,
touch CANCEL (the colon
remains
on) or
touch in cooking
instructions.
One note: The Command
and Number
Pads are not buttons.
You don't have to
oush them...iust
touch them.
DIGITAL DISPLAY
down time settings
and it shows you whai
number
pads You touched.
COMMAND
PADS AND SIGNAL LIGHTS
Touch Com-
mand Pads to tell
the microwave
oven what to do
and in what order.
A few examples:
-COOK
CYCLE 1
[or 2) tells the
oven You are
going
to cook.
you are going
to
cook at less
than full power.
-START tells the oven to start.
Each Command
Pad has its own Signal
Light (except
START and CANCEL). The Signal
Light comes
on when You touch the Com-
mand
Pad.
While the oven is running,
a Signal Light (or
lights] will be on to show what the oven is
doing.
NUMBER PADS
the oven what vou
I-
Control
Panel ON /OFF Switch
Advertisement
