2.
Click the [Detail] button to switch to the detail view mode.
Example: ScanSnap setting dialog box when scanning using the Quick Menu.
Outline view
HINT
The ScanSnap setup dialog box retains the display status from the last time the ScanSnap was
used. For example, if it was closed in detail view mode, the dialog box is displayed in detail view
mode next time you open it.
3.
Set the scan settings in each tab.
For details about each tab, refer to the ScanSnap Manager Help.
ATTENTION
Scan settings vary depending on the scanning method.
For details about items that can be set, refer to
Configuring ScanSnap Manager (for Windows Users)
Detail view
"Setting Items by Scanning Method" (page
238
427).