Entertainment - Alba LE-24GY15-T2+DVD Instruction Manual

Basic Features
Let's get started

Entertainment

Using the Features via USB Port
1. Switch off the TV before connecting any USB storage
device.
2. Connect your USB storage device to the USB port of
your TV.
3. Press the button on the top of the TV or
button on the remote control to turn on your TV and
your USB storage device.
4. Press the SOURCE button on the top of the TV or the
SOURCE button on the remote control to display the
Source List. Use the
then press the OK button to confirm.
Attention:
• Some versions of portable hard disk may require
more power than the TV USB socket can provide. To
ensure correct operation please use power adapter
for that device.
• If a USB hub is used make sure its mains adapter is
connected to the mains supply as the total current
consumption exceed 500mA.
• The maximum supported storage space of the hard
disk is 1 TB.
• The file system only support FAT32 format.If
you want to store the video streaming of a DTV
programme, the transfer rate of the USB storage
device must not be less than 5MB/s, otherwise
the picture and sound of the programme will be
affected and a warning statement will be shown on
the screen. If this happens, please upgrade your USB
storage device.
• The TV screen will be blank temporarily as it will take
time to start up and stabilize the connected hard
disk. This is normal and the starting time may vary
depending on the brand and the memory size of the
connected hard disk.
• Disconnect the USB storage device if it is not in use.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Basic Features
46
the
buttons to select USB and
Viewing Photo
1. Press the SOURCE button on the top of the TV or the
SOURCE button on the remote control then press
the buttons to select the USB mode and then
press the OK button.
2. Press the buttons to select Photo and then press
the OK button.
3. Press the buttons to select your storage device
and then press the OK button.
Photo
USB1
. . .
USB1
Move CH + / - Change Page
4. Press the buttons to navigate in the picture
folder and then press the OK button. If you want
to select the specified photos, press the
buttons to select the picture file and then press the
OK button.
File format supported: JPG.
Photo
USB1/Photo
. . . AITEMP MY PVR
LE32G
Photo
Move CH + / - Change Page
5. Press the or OK button to view.
6. Press the OK button or the DISPLAY button to
display the function bar: Play / Pause / Previous /
Next / Rotate / Quick Menu (Interval Time / Repeat
/ Slideshow Effect / Background Music).
If this folder also contains music files,
you can select a music track to play at
the same time you view your photos.
1/1
OK Selete Quick Menu EXIT Return
Movie Music Photo Text
OK Selete Quick Menu EXIT Return