Alba LE-24GY15-T2+DVD Instruction Manual page 38

Basic Features
Let's get started
Channel management (ATV / DTV Mode)
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
If you stop the tuning before it has
finished, the TV will report a no signal
error. This is normal because all previous
channel memory has been cleared before
tuning is carried out.
Manual Scan (DTV Mode)
Allows you to make manual fine tuning adjustments to
the channel under DTV mode.
1. Press the MENU button to display the main menu.
Press the buttons to select Channel in the main
menu, then press the or OK button, it will highlight
the first option.
2. Press the buttons to select Manual Scan and then
press the OK button. On the submenu, select Digital
Manual Scan and then press the OK button.
Digital Scan
Press the buttons to select the desired channel.
Start
Press the buttons to select Start and then press the
OK button to start tuning.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Basic Features
38
MENU: Skip EXIT: Exit
Manual Scan (ATV Mode)
Allows you to make manual fine tuning adjustments if the
channel reception is poor under ATV mode.
1. Press the MENU button to display the main menu.
Press the buttons to select Channel in the main
menu, then press the
the first option.
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Information
OK: Select
Move
2. Press the buttons to select Manual Scan and then
press the OK button. On the submenu, select Analog
Manual Scan and then press the OK button.
Analog Scan
Displays the current frequency, press the
change the frequency.
Channel to Save
Press the
buttons to select Channel to Save, press the
buttons to select channel number you want to store.
Colour System
Press the buttons to select Colour System, press the
buttons to select: Auto / PAL/SECAM.
Sound System
Press the buttons to select Sound System, press the
buttons to select: DK/I / BG.
AFC
Press the buttons to select AFC, press the
to select On or Off.
Start
Press the buttons to select Start, press the
to start tuning.
or OK button, it will highlight
Channel
MENU: Return EXIT:Exit
buttons to
buttons
buttons