Epson SureColor F6200 series Settings Manual page 17

Adjust tank height – Detail Adjustment
1. Tighten Right Long Screw until the thickness(2.0mm) gauges can be
moved smoothly, AGAIN
2. Tighten Left Long Screw as the same as the right one.
Right Long Screw
Tighten to adjust
3. Make sure the thickness gauge(2.5mm)
(Black and
Can't be Passed
SE Group Confidential (Related Staff Only) Until: Permanent
at 2
Cyan).
Thickness
gauge(2.5mm)
locations(Black and
Left Long Screw
Tighten to adjust
can't be passed
Can't be Passed
.
Cyan)
at 2 locations
17